Hydraulic/Hydrostatic Components

Cessmtrb(s).jpg (5385 bytes)

Cessna* 74118 Wheel Motor

Most often paired with the 70442 pump in the Hagie 470 the Cessna 74118 displaces 1.24 c.i.r. with a maximum rated speed of 3600 rpm. SAE A 2-bolt mounting flange.  3/4" 24 tooth spline output  shaft.  Used to drive W1A###1## torque hubs.
Price: $250 used,  $400 reconditioned

 Cessmtra(s).jpg (6564 bytes)
Cesspmp(s).jpg (5892 bytes)

Cessna* 70442 & 78490 Hydrostatic Transpump

Displaces 2.48 c.i.r. with 3000 rpm rated input speed.  SAE B 2-bolt mounting flange.  1" 15-tooth splined input shaft.  Mechanical control (use appropriate locking type control lever).  Used primarily on Hagie 470 tractors
Price: $600 used,  $800 reconditioned.

 Cesspmpa(s).jpg (6449 bytes)
SundpmpM46(s).jpg (6971 bytes)

Sauer/Sundstrand** M46 Hydrostatic Transpump

Displaces 2.81 c.i.r.  with 4000 rpm rated input speed.  SAE B 2-bolt mounting flange.  1" 15-tooth splined input shaft.  Servo control.   Used as transmission and auxiliary hydraulic drive for PDF 420G tractors
Price: $1100 reconditioned

 SundpmpM46a(s).jpg (7533 bytes)
Sundmtr15(s).jpg (6177 bytes)

Sauer/Sundstrand** 15 Series Wheel Motor

Displaces .913 c.i.r. with 4000 rpm rated output.  SAE A 2-bolt mounting flange.  24-tooth splined output shaft.  Used to drive W1A###1## torque hubs.
Price: $250 used  $400 reconditioned

 Sundmtr15a(s).jpg (7399 bytes)
Sundmtr18(s).jpg (6390 bytes)

Sauer/Sundstrand** 18 Series Wheel Motor

SAE B 2-bolt mounting flange.  7/8" 13-tooth splined output shaft (some units with parking brake shaft shown at right).  Used to drive W1B###3## torque hubs.
Price: $250 used, $400 reconditioned

 

 Sundmtr18a(s).jpg (6447 bytes)
Barnesctr(s).jpg (5941 bytes)

Haldex Barnes Detasseling Cutter Motors
Hagie part #610755

Bidirectional, externally case drained, gear motor w/ 7/8" keyed output shaft, center drilled and tapped 3/8" NF.  3000 RPM.  Used to drive rotary cutter units.
Price: $470 new

 Barnesctra(s).jpg (6635 bytes)
Barnesroll(s).jpg (7090 bytes)

John S. Barnes Detasseling Roller motors
Hagie part #610051

Bidirectional, externally case drained, gear motor w/ 3/4" keyed output shaft.  Higher torque and slower speed than the 610755.
Price: $125 new

 Barnesrolla(s).jpg (7444 bytes)
     
     

Other parts available call (410)778-1065 or email for availability

Most reconditioned units have been remanufactured by Fauver/Sun Source or Spencer Fluid Power

Prices subject to change without notice

*Now made by Eaton

**Now known as Sauer/Danfoss

Disclaimer:  Due to circumstances beyond our control, such as cross contamination, we cannot warrantee these units.  All units are sold 'as is' .   The purchaser assumes all risks involved in the use of these components whether they are used or reconditioned

All international inquiries, inspections, orders and shipping are Ex Works (EXW) and therefore must be placed in person or through a US agent.  We will not assume any responsibility for shipping quotes, arranging of containers or transport to port of exit.   Buyer agrees to pay on receipt and to assume all costs and responsiblilities beyond our facilities in Worton, MD USA.

Home    Email    Parts     Hagie Hi-Clearance    Hagie Detasseler

Site last updated  9 November, 2007
webmaster@plainviewfarms.com

Copyright ©2007 Plain View Farms, LLC